Call 516-248-5858 | Products | Best Values and Hot Deals

Buy from BiNA Online

BiNA Office Furniture • Online Shopping • Call: 516-248-5858

BiNA Discount Office Furniture » Deals & Discounts »

 

How To Arrange Your Furniture


This will hopefully help you to know where to put your furniture. The most important part is to first toss away the junk, move the bed and make sure there is nothing underneath it, and get ready to arrange.

Steps

1. Purpose

Determine what purpose the space the furniture occupies has and the purpose of each piece of furniture. This will have an effect on how space might be divided up and furniture arranged. Some furniture may not belong in a given space.
  • Primary Conversation Area:
    • 8-12 feet in diameter is ideal
    • Seats 4-6 people
  • Secondary Conversation Area:
    • Seating for just 1-3 people
  • Conference Area:
    • Allow 3 feet from the table edge for the person to be seated at the table and room behind for traffic.
    • Each person is allowed a minimum of 24 inches of seating room at the table.

2. Measure

Measure the room and write down its dimensions. Do the same for your furniture. Make a flat scale drawing of the room using graph paper as if seen from above. (EXAMPLE: 1 little square represents one quarter of a square foot [3"] and four of those equal one square foot.) You may want to shade the floor close to what is already there (beige if the carpet is beige) if there is a need to coordinate colors -just make sure you can see the lines on your graph paper.

3. Draw Room

Draw flat scale drawings of your furniture as if seen from above. Don't get too detailed. At the very least you need the size and shape in relation to the room; Color the piece if you think it's important and then label it.

4. Space Design Guidelines

Consider the following traffic flow / spacing guidelines:
  • Spaces that need 36"-6' clearance:
    • Hallways
    • In front of closets, file cabinets, and storage cabinets.
    • Any route where two people might pass each other
    • In front of counter or utility areas, e.g. photocopier, computer printer, fax machine.
    • From the edge of a conference room table to a wall or stationary object.
    • 4' or more for stairways.
  • Spaces that need 18"-4'clearance:
    • Between sofas & coffee tables
    • 30" in routes where only one person will walk such as around private desk or through private doorways.
    • There should be at least 30" of clearance in front of utility areas.

5. Configure Room

Take your scale drawing of the room's floor plan and rearrange the scale drawn pieces of furniture on it until you see a configuration you like and think works best for the space and furniture's purposes and traffic flow. Tape the pieces down with small pieces of tape (so that you can easily move them if you change your mind) and begin preparing to move your furniture into that configuration.

6. Moving Furniture

You have two options for moving the furniture:
  • Move everything out of the room
-OR-
  • Move pieces little by little.

7. Options

Regardless of your above choice the following steps are applicable:
  • Move the first piece to where you want it to go, and keep going from there.
  • Move all the things outside your door back into your room.

Tips

  • Clean the room before you move the furniture.
  • Decide whether or not the furniture in the room should be kept. It should serve the room's purpose and be on the scale of the room -a small room should have small pieces of furniture and large room should have large pieces. If a large room cannot be filled with large pieces of furniture, divide the space up using the smaller pieces of furniture available arranged around / anchored by an area rug.
  • Use a computer application such as Visio to help draw up your scale drawings.
  • Area rugs not only work to bring color, texture and interest to a room but work as traffic flow guides and indications of transition from one area to another. Arrange furniture around or on top of area rugs. (A coffee table would be placed on top of an area rug, for example, and furniture arranged around that.)
  • Clean the furniture before moving it back in place. It may be a long time before you bother to move that piece again for thorough cleaning.
  • Vacuum or clean the floor afterwards.
  • If you have wooden floors, put a piece of old carpet or a rag under each leg before you move an item of furniture; it will slide more easily and won't scratch the floor. Leave it there after you have finished to avoid damaging the floor.
  • If you are moving pieces on carpet consider moving pads or placing pieces of cardboard or wood on the floor so that furniture slides more easily.
  • Warnings

    • Do not move furniture in a messy room!
    • Be careful and do not move anything that is too heavy for you!

This article provided as a public service. Bina Office Furniture is not responsible for its contents or your results. Article adapted from wikiHow

Labels: , , ,


 

How To Draw A Floor Plan to Scale


floorplan

Draw a floor plan to scale for any room. Use cut out pieces of furniture at the same scale to plan various furniture layouts for the room. Decide on a layout before moving heavy pieces of furniture. Take the plan when shopping. The store design associate will help you decide on a new arrangement for furniture or counters.

Steps

  1. Use a graph pad where each square on the paper equals one quarter of an inch (four squares equal one inch) or create your own grid of equal squares on a blank sheet of paper
  2. Imagine each square represents one foot (12 inches)
  3. Measure the length of one wall with the tape measure
  4. Draw a line on the graph paper to represent this length of wall by counting the squares. For example: The wall is eight feet six inches long. Count out eight and a half squares.
  5. Measure the length of each wall around the room
  6. Measure the length of each door and window opening (without frames) from the corner of the closest wall and add to the drawing
  7. Draw windows as double lines and doors with a line and an arc
  8. Measure the length and widths of all built in fixtures such as counters and add to your plan
  9. Measure the length and width of each piece of furniture for this room with the tape measure
  10. Draw the furniture on another sheet of graph paper - the squares represent 12 inches
  11. Cut out the individual pieces of furniture with scissors
  12. Glue or tape the cut outs onto a piece of cardboard for weight
  13. Move the cut out furniture around on your plan to decide on a suitable arrangement

Things You'll Need


  • Paper - graph pad 鈥?4 squares to an inch
  • Tape measure 16 ft. or longer
  • Sharp pencil
  • Scissors
  • Cardboard
  • Glue stick or scotch tape

Sources and Citations

Article provided by wikiHow

Labels: , , ,


 

Hate Your Office? Want A Change? We Can Help!


ugly office All around the internet we hear about people with crazy offices and unmanageable office spaces. But you won't hear that from our customers! They love the quality work we do, and we'd love to help you plan your office to ensure you're getting the best value for your square footage and resulting workflow.

From your construction schematic, or rough pencil sketch (!) we can work with you to spec out the possible sizes available to you in the series of products you like. Our showroom is bursting with examples of find office cubicles, desks and chairs to suit every office environment, and every business budget.

Come into our showroom today and buy a better office now. What are you waiting for?

Labels: , , , ,




Discount Office Furniture Specials


<< Office Furniture DiscountsHome

How To Arrange Your Furniture
How To Draw A Floor Plan to Scale
Hate Your Office? Want A Change? We Can Help!

Discount Office Furniture Dealer metro New York City and Long Island, NY. Visit Long Island's Most Complete Office Furniture Showroom, today! Call BiNA Office Furniture 516-248-5858

日本wvvw在线中文字幕_日本不卡免费一区二区_日本不卡一区二区高清更新